Sunday, September 18, 2011
How much would a fuse for a sun roof on a VW Golf cost?
I tried to open the sunroof on my VW Golf and the fuse blew. I need a new one but don't know where to get it or how much it costs. Any help would be appreciated.|||You get fuses at a parts store. They are usually in blister packs hanging on a wall in the lights dept. You can get a assortment for your car for about 3 or 4 dollars. Pick out the one you need and keep the package (it's small) in the glove box for the next time you need a fuse.
How difficult is replacing a VW clutch?
I've got a '90 VW Cabriolet with a clutch that has started slipping. I have access to a DIY shop with hydraulic lifts and every tool I'd ever need, but is this type of thing really worth doing myself to save a few hundred bucks?|||This is a difficult job on any car. You really need to know what you are doing. But you can learn; just buy the book. Is it worth doing yourself?? Depends on how much you like to do this kind of stuff. I like working on cars myself. But if you don't, you probably won't like doing this one. As it is a big job. Stick with easier stuff first.|||not unless your a professional mechanic, the whole engine has to come out.
How do I locate and clean the water drains under the hood of a 2001 VW Passat?
Hello,
I've got a 2001 VW Passat V6 and have noticed (with alarm!) that the shelf that the battery sits on is filling up with significant amounts of water each time it rains.
My local VW dealer says it's because the water "drains" have gotten clogged up. But based on their description of where these drains are located I can't seem to find them.
Do you know of a drawing online that illustrates where these water drains are -- (near the battery)? Or perhaps can offer a clear description as to how to locate and clean the drain?
Thanks!|||You probably won't find them online.
But if the battery tray is plastic don't worry about it. It's plastic and won't hurt your battery.
If it really bothers you, drill a few new drain holes in the 'shelf' where water won't build up.
I've got a 2001 VW Passat V6 and have noticed (with alarm!) that the shelf that the battery sits on is filling up with significant amounts of water each time it rains.
My local VW dealer says it's because the water "drains" have gotten clogged up. But based on their description of where these drains are located I can't seem to find them.
Do you know of a drawing online that illustrates where these water drains are -- (near the battery)? Or perhaps can offer a clear description as to how to locate and clean the drain?
Thanks!|||You probably won't find them online.
But if the battery tray is plastic don't worry about it. It's plastic and won't hurt your battery.
If it really bothers you, drill a few new drain holes in the 'shelf' where water won't build up.
What is the best filler and technique to use when removing the rust on my VW Camper 1973?
My 1973 VW camper van has minor rust that I would like to remove before the summer season starts. I'm gonna sand it down, fill it with a filler and spray it over with "Krust" and paint.
I've been to Halfords to look for fillers but I'm not sure if I need a special kind for it. Anyone out there who knows a bit about classic cars/VW camper vans?|||I would go the hardcore way and cut out the affected area, or remove the entire panel, weld in a new piece of metal (or a new panel) in place and then prime and paint it. But that's just me. I don't care for bondo or fiberglass patches.|||make sure to clean it well and use a compund that kills the rust. i would personally recommend using fiberglass filler and the fiber strips rather than bondo. much easier to work with and lasts longer.|||Remove as much as you can with navel jelly so as not to make any holes any bigger, if that isn't sufficient a brass wire wheel on a drill works well, as for filler Bondo is the only way to go! Even after wire wheel clean with mineral spirits or alcohol then put primer on it asap!|||http://www.jcwhitney.com/autoparts/ItemB鈥?/a>
I've been to Halfords to look for fillers but I'm not sure if I need a special kind for it. Anyone out there who knows a bit about classic cars/VW camper vans?|||I would go the hardcore way and cut out the affected area, or remove the entire panel, weld in a new piece of metal (or a new panel) in place and then prime and paint it. But that's just me. I don't care for bondo or fiberglass patches.|||make sure to clean it well and use a compund that kills the rust. i would personally recommend using fiberglass filler and the fiber strips rather than bondo. much easier to work with and lasts longer.|||Remove as much as you can with navel jelly so as not to make any holes any bigger, if that isn't sufficient a brass wire wheel on a drill works well, as for filler Bondo is the only way to go! Even after wire wheel clean with mineral spirits or alcohol then put primer on it asap!|||http://www.jcwhitney.com/autoparts/ItemB鈥?/a>
I lost my VW key fob. Does anyone know the process for changing the locks on the car?
I lost my VW key fob, and while I think it's somewhere in my apartment building and that I have trustworthy neighbors, I'm still worried about it getting stolen. I was wondering what the whole process is for changing the locks on a VW. Will they have to re-program the internal computer? How much would replacing the locks cost? Any information that can be offered would be appreciated.|||Depending upon the year, some VW's only have a driver's door key lock and a trunk lock. If it is a late model with the immobelizer, then if your concern is strickly to prevent the car from being stolen, then just get another key cut and with the remaining keys/fobs, have them programmed to the vehicle. This will prevent the car from being started, but won't prevent them from getting inside the car. You can just replace the drivers door cylinder (if its a late model VW) that comes with its own key and if you're still worried about them getting into the car thru the trunk, disable the trunk (boot) cylinder. I've done this for people and it seems to work well. Most insurance companies will not pay to have the locks replaced.
VW sells a set of locks that are keyed alike: ignition, door, glove box and trunk, but they aren't cheap and depending upon the year of the car you expect to spend anywhere from 1.0 to 3.5 hours of labour at the posted rate, plus the lock set. Lock sets run anywhere from 100.00+ up!
As I said earlier, the best thing I think, is to replace the door lock(s), reprogramme the keys to the car, thus eliminating the possible use of your lost key to steal the vehicle. You can disable the trunk lock so that only the key fob or the trunk switch can open the trunk (boot).
The lock set would require the removal of the door handle(s) to replace the lock, the trunk lock would have to be removed (remove the noise liner on the trunk lid to gain access to the lock retainer and linkage), pop the lock from the glove box door, but the big thing is removal and replacement of the ignition lock cylinder. If you replace the lock in the ignition, you will have to reprogramme the keys to the computer; you cannot do this, it will have to be done by the dealership or a VW specialist that has the VAG scanner with the correct software and is familiar with the proceedure.
I wish you a lot of luck. Best wishes always, a car nut.|||Call a VW dealer...I'm sure that would be your best info. I lost my keys but I had the Vin number and they were able to make matching keys. (it was a Ford but most dealerships have the same policies) Luck !|||its cheaper to go to mechanic and get hidden switch put in for fuel pump cutoff/key job is big money
VW sells a set of locks that are keyed alike: ignition, door, glove box and trunk, but they aren't cheap and depending upon the year of the car you expect to spend anywhere from 1.0 to 3.5 hours of labour at the posted rate, plus the lock set. Lock sets run anywhere from 100.00+ up!
As I said earlier, the best thing I think, is to replace the door lock(s), reprogramme the keys to the car, thus eliminating the possible use of your lost key to steal the vehicle. You can disable the trunk lock so that only the key fob or the trunk switch can open the trunk (boot).
The lock set would require the removal of the door handle(s) to replace the lock, the trunk lock would have to be removed (remove the noise liner on the trunk lid to gain access to the lock retainer and linkage), pop the lock from the glove box door, but the big thing is removal and replacement of the ignition lock cylinder. If you replace the lock in the ignition, you will have to reprogramme the keys to the computer; you cannot do this, it will have to be done by the dealership or a VW specialist that has the VAG scanner with the correct software and is familiar with the proceedure.
I wish you a lot of luck. Best wishes always, a car nut.|||Call a VW dealer...I'm sure that would be your best info. I lost my keys but I had the Vin number and they were able to make matching keys. (it was a Ford but most dealerships have the same policies) Luck !|||its cheaper to go to mechanic and get hidden switch put in for fuel pump cutoff/key job is big money
How much does it cost to replace wheel bearings on a VW Golf?
I have a 98 VW Golf GTI VR6 and the FR wheel bearing is going bad. On long sweeping left turns it makes a really low rumbling sound. I called Midas and they said that it would cost about $575 to fix, that seemed over priced so I want to get an idea of how much it should cost.|||Been a while since I worked on a vehicle that small as I work on trucks now but an old rule of thumb. If the bearing is less than 50 dollars it will be real expensive to install (pressed in). If the bearing is over 120 dollars it will probably bolt in easily. Check online at the local auto parts stores for your area and price the bearing first and that will get you pointed in the right direction
They will get you coming or going.|||yes i think it overpriced i cant be sure on what it cost,s i tend to stay away from fast fit joints, best thing phone a motor factors ask the price for a bearing kit. i would allow say in pounds 拢125.00 max labour to replace bearing , some people say that you should replace both sides at the same time|||This is a press in style bearing.
You should have a REAL mechanic work on it, not midas. When midas gets a call to fix a VW, Audi, Mercedes, BMW or any other european vehicle they quote it super high because they don't want to do it.
A real mechanic that works on VW's would probably charge around $300 for the front two.|||I am pretty sure that is a sealed bearing on the VW. If so they are a lot more expensive than the old traditional wheel bearings. They are also pressed into the hub assembly. You may find someplace to do alittle cheaper but if that is for both sides i dont think its that bad a deal.|||well go to a local parts store and find out the price of the parts and then check out labor rates at a mechanic of choice. and add the two and that is what it should cost.
They will get you coming or going.|||yes i think it overpriced i cant be sure on what it cost,s i tend to stay away from fast fit joints, best thing phone a motor factors ask the price for a bearing kit. i would allow say in pounds 拢125.00 max labour to replace bearing , some people say that you should replace both sides at the same time|||This is a press in style bearing.
You should have a REAL mechanic work on it, not midas. When midas gets a call to fix a VW, Audi, Mercedes, BMW or any other european vehicle they quote it super high because they don't want to do it.
A real mechanic that works on VW's would probably charge around $300 for the front two.|||I am pretty sure that is a sealed bearing on the VW. If so they are a lot more expensive than the old traditional wheel bearings. They are also pressed into the hub assembly. You may find someplace to do alittle cheaper but if that is for both sides i dont think its that bad a deal.|||well go to a local parts store and find out the price of the parts and then check out labor rates at a mechanic of choice. and add the two and that is what it should cost.
How do they film the VW commercials which demonstrate the air bags deploying during an accident?
These are the commercials where a couple get T-boned in their VW, while talking about thier eveving. The commercials are pretty good (since most car commercials are horrible) a looks realistic!|||I think what they do is an actual simulated crash. First i bet they have the people actually in the car then take them out maybe 1 frame before the crash actually happens, making it look like it was real. Another way would be to also digitally put them in.|||i think they use computer animation to help it look real.|||I would imagine they have little cameras inside the vehicle %26amp; placed all around the scene. Check the web--do a search on VW, they may have a link in there.|||The folks at VW really crashed the cars with people inside. No computer animation or blue screen trickery.
Subscribe to:
Posts (Atom)